Traction Battery Charger

Traction Battery Charger
Traction Battery Charger
Price And Quantity
  • 1
  • Piece/Pieces
    Product Description

    Serving the industry for the last 44 years, we have become a renowned manufacturer and supplier of an extensive range Traction Battery Charger. This charger is manufactured by using optimum quality components procured from the most reputed and reliable vendors of the market. Our Traction Battery Charger is used in different vehicles like electric fork lift trucks, electric tractors, and personnel carriers. Our team of skilled quality control inspectors checks this range on various quality parameters before dealing with the clients.


    • Rugged construction
    • Safe to use
    • High operational fluency

    Technical Specifications

    Input AC

    Nominal 230V AC single phase, 50 Hzs additional tapping 190V, 210V, 250V

    Output DC

    Suitable to charge 110V, 200AH LAC battery
    Under Boost Mode: 100V to 160 V and current 10A to 30A
    under trickle mode: 115V to 135V and current 0.5A to 5A DC
    Both mode are controlled by 2 nos. rotary switch as COARSE & FINE control and addition 1 no. switch provided for selection Boost mode or trickle mode.

    Output current stability

    Max + 25% DC if vary the input voltage + 10% AC

    Output AC ripple

    Max. 5%

    Overall watt efficiency at full load

    Min 75%

    Temp. Rise

    Max. 50oC

    Equipment insulation resistance

    Min. 50

    Equipment H.V. Test

    2 KV AC RMS for one minute.


    M.S. Sheet steel enclosure suitable size angle iron structure and painted cabinet IP-%4 suitable for protection rain.

    Indication & protection

    Input ON/OFF switch, Fuse, Indication lamp and output fuse, DC voltmeter provided.

    Dynamic load

    10% to 90% range + 10% typical


    HRC Fuse, Circuit breaker and electronic


    110% for 10 minutes and 200% for 200 mili

    Ambient condition

    -10 TO 40oC optional up to 65oC


    96% non condensing

    Audible noise

    Less than 60dB at 1 meter


    UP TO 1000 mts

    Voltage regulation

    + 1%

    Current regulation

    + 2%

    Riple voltage

    1"- 3% RMS 9normally)

    Indication instruments

    Indications for 3 phase mains supply
    Float/Boost Section
    AC volt meter with selector switch
    DC voltmeter with selector switch and battery volt
    DC Amps meter for lead
    DC Amps meter for Charging


    Electronic trip against input fail/ Wrong phase
    Gate pulse inhibit AC under voltage/ over voltage
    High speed semiconductor fuse at rectifier input
    HRC fuse at output and filter circuit
    Soft start with current limiting circuitry against
    over load and short circuit
    Device over temperature shut down (optional)


    Audio  visual annunciation with flashing LEDs and piezzo buzzer
    Fuse failure relay
    DC earth fault Relay

    Termination of charging

    Automatic annunciation with flashing LED's and piezzo buzzer

    Trickle/boost change over



    Folded construction with CRCA sheet steel

    Degrees of protection

    Folded construction with CRCA sheet steel




    Air natural or forced cooling


    Epoxy powder coated paint. Normally RAL 7032, Siemens grey OR as per customer's requirement

    Trade Information
    • East India
    Contact Us

    T16/1C, Dr. S. C. Banerjee Road, Kolkata, West Bengal, 700010, India
    Phone :91-33-23705784